7 research outputs found
Recommended from our members
Development and Demonstration of a TDOA-Based GNSS Interference Signal Localization System
Background theory, a reference design, and demonstration
results are given for a Global Navigation Satellite
System (GNSS) interference localization system comprising a
distributed radio-frequency sensor network that simultaneously
locates multiple interference sources by measuring their signals’
time difference of arrival (TDOA) between pairs of nodes in
the network. The end-to-end solution offered here draws from
previous work in single-emitter group delay estimation, very long
baseline interferometry, subspace-based estimation, radar, and
passive geolocation. Synchronization and automatic localization
of sensor nodes is achieved through a tightly-coupled receiver
architecture that enables phase-coherent and synchronous sampling
of the interference signals and so-called reference signals
which carry timing and positioning information. Signal and crosscorrelation
models are developed and implemented in a simulator.
Multiple-emitter subspace-based TDOA estimation techniques
are developed as well as emitter identification and localization
algorithms. Simulator performance is compared to the CramérRao
lower bound for single-emitter TDOA precision. Results are
given for a test exercise in which the system accurately locates
emitters broadcasting in the amateur radio band in Austin, TX.Aerospace Engineering and Engineering Mechanic
Recommended from our members
Analysis of Ionospheric Scintillations using Wideband GPS L1 C/A Signal Data
A non-real-time GPS receiver has been developed and
tested for use in scintillation analysis. The receiver consists
of a digital storage receiver and non-real-time software
acquisition and tracking algorithms. The goal of
this work is to shed light on the behavior of strongly
scintillating signals: signals which cause conventional
GPS receivers to lose carrier lock.
The receiver collects wideband GPS L1 digital data sampled at 5.7 MHz using an RF front-end and stores it
on disk for post-processing. It processes the data off-line
to determine carrier signal amplitude and phase variations
during scintillations. The main processing algorithms
are traditional code delay and carrier frequency
acquisition algorithms and special signal processing algorithms
that effectively function as a delay-locked loop
and phase-locked loop. The tracking algorithms use
non-causal smoothing techniques in order to optimally
reconstruct the phase and amplitude variations of a
scintillating signal. These techniques are robust against
the deep power fades and strong phase fluctuations
characteristic of scintillating signals.
To test the receiver, scintillation data were collected
in Cauchoeira Paulista, Brazil, from December 4 to 6,
2003. The data set spans several hours and includes
times when one or more satellite signals are scintillating.
The smoothing algorithm has been used to determine
the carrier amplitude and phase time histories
of the scintillating signals along with the distortion of
the pseudorandom noise (PRN) code’s autocorrelation
function. These quantities provide a characterization
of scintillation that can be used to study the physics of
scintillations or to provide off-line test cases to evaluate
a tracking algorithm’s ability to maintain signal lock
during scintillations.Aerospace Engineering and Engineering Mechanic
Recommended from our members
Assessing the Spoofing Threat: Development of a Portable GPS Civilian Spoofer
A portable civilian GPS spoofer is implemented on a digital
signal processor and used to characterize spoofing effects and develop defenses against civilian spoofing. This
work is intended to equip GNSS users and receiver manufacturers
with authentication methods that are effective
against unsophisticated spoofing attacks. The work also
serves to refine the civilian spoofing threat assessment
by demonstrating the challenges involved in mounting a
spoofing attack.Aerospace Engineering and Engineering Mechanic
Real-time software receiver
A real-time software receiver that executes on a general purpose processor. The software receiver includes data acquisition and correlator modules that perform, in place of hardware correlation, baseband mixing and PRN code correlation using bit-wise parallelism
Recommended from our members
GNSS Receiver Implementation on a DSP: Status, Challenges, and Prospects
A real-time GPS L1 C/A-code software receiver has been
implemented on a Digital Signal Processor (DSP). The
receiver exploits FFT-based techniques to perform autonomous
acquisition down to a threshold of C/N0 = 33
dB-Hz. Efficient correlation algorithms and robust tracking
loops enable the receiver to track an equivalent of 43 L1
C/A-code channels in real time with a tracking threshold
of 25 dB-Hz. This accomplishment represents a milestone
in an ongoing effort to develop a low-cost, flexible, and capable
GNSS receiver for use as a scientific instrument and
for GNSS receiver technology development. This paper reports on the current design and capability of the DSPbased
receiver, provides an overview of the challenges that
are particular to embedded GNSS software receiver design,
and discusses the prospects of DSP-based GNSS software
receivers in relation to the multiple frequencies and higher
bandwidths offered by modernized GNSS.Aerospace Engineering and Engineering Mechanic